18 3/4"X 68 5/8" Old Internal Stripped & Painted Pine Reclamation

3 plank ledge door which has a V chamfer with 3 ledges
Could also be used for a cupboard door.
Made from: Pine
Internal use
Finish: Stripped one side & painted the other.
Used condition
Needs a good clean ,Some scratches and marks
Comes with old T hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
1 of these photos have the following comments,
4th picture shows t- hinge

If you have any other questions then please ask.

Measurements:
Height: 174.4cm or 68 5/8"
**Height could be cut down by 24cm**
**17cm off the top 7cm off the bottom**
**Which could make the height as low as 150.4cm or 59 1/8 inches**

Width: 47.9cm or 18 3/4"
Plank Thickness: 1.5cm or 0 1/2 inches
Ledge/Brace Thickness: 2.1cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 3.6cm or 1 3/8 inches
Height from the bottom of the slant : 155cm or 61"
Length of slant : 29.3cm or 11 1/2"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 10kg or 22lbs
Approximate age: Old