19 1/2"X 72 3/4" Old Internal Painted Pine 3 Plank Ledge Door Reclamation

3 plank ledge door which has a pencil bead with 3 ledges
Could also be used for a cupboard door.
Made from: Pine
Internal use
Finish: Painted Brown
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Used condition
Has a bit of old woodworm damage that has been treated
Comes with old T hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
1 of these photos have the following comments,
11th picture shows treated woodworm

If you have any other questions then please ask.

Measurements:
Height: 184.8cm or 72 3/4"
**Height could be cut down by 18cm**
**14cm off the top 4cm off the bottom**
**Which could make the height as low as 166.8cm or 65 5/8 inches**

Width: 49.6cm or 19 1/2"
**Width could be cut by 4cm**
**Which could make it as narrow as 45.6cm or 17 7/8 inches**

Plank Thickness: 1.5cm or 0 1/2 inches
Ledge/Brace Thickness: 2cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 3.5cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 10kg or 22lbs
Approximate age: Old