20 1/4"X 61 3/8" Old Internal Stripped Pine 4 Plank Ledge Door Reclamation

4 plank ledge door which has a pencil bead with 3 ledges
Could also be used for a cupboard door.
Made from: Pine
Internal use
Finish: Stripped
Used condition
Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
comes with steel hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
0 of these photos have the following comments,

If you have any other questions then please ask.

Measurements:
Height: 156cm or 61 3/8"
**Height could be cut down by 26cm**
**11cm off the top 15cm off the bottom**
**Which could make the height as low as 130cm or 51 1/8 inches**

Width: 51.5cm or 20 1/4"
**Width could be cut by 3cm**
**Which could make it as narrow as 48.5cm or 19 inches**

Plank Thickness: 2.2cm or 0 3/4 inches
Ledge/Brace Thickness: 2cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 4.2cm or 1 5/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 9kg or 19lbs
Approximate age: Old