20”x24” Reclaimed Old Stripped Pine 3 Plank & Ledge Internal Cupboard Door

This internal old 3 plank and ledge door is stripped
It’s made from pine and is in used condition
It has some old nail or screw holes
The door would benefit from a sanding and needs a good clean (see photos)
The planks are flush
The door has no hinges
It could also be used as a cupboard door
This door has been made from old floorboards
It could be cut down in height and width**
As well as the description we have taken 12 pictures, please look through them in detail

Measurements:
Door Height: 61.2cm or 24”
(**The height could be cut down by 3cm. 1cm off the top, 2cm off the bottom, which could make the height as low as 58.2cm or 22⅞ inches)
Door Width: 50.9cm or 20”
(**The width could be cut by 4cm, which could make it as narrow as 46.9cm or 18⅜ inches)
Plank Thickness: 2cm or ¾ inch
Ledge/Brace Thickness: 1.8cm or ⅝ inch
Total Thickness of Planks & Ledges: 3.8cm or 1½ inches

Note: Inches are rounded down to the nearest ⅛
Approximate Weight: 5kg or 11lbs
Approximate Age: Old

The door has no hinges but we do have lots of old hinges in stock that may fit this door, please get in touch if you need some.