Panel Door with a four horizontal panel layout it is beaded on both sides of the door
Made from: Pine & ply panels
Internal use
Finish: Painted White & Blue
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Used condition
Flaking paint ,Has not be cut square at the bottom,Has not be cut square at the top,We have measured to make the door square,Needs a good clean ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
2nd picture shows top not square
3rd picture shows bottom not square
11th picture shows old screw holes


Measurements:
Height: 194cm or 76 3/8"
**Height could be cut down by 8cm**
**1cm off the top 7cm off the bottom**
**Which could make the height as low as 186cm or 73 1/8 inches**

Width: 68.1cm or 26 3/4"
**Width could be cut by 3cm**
**Which could make it as narrow as 65.1cm or 25 5/8 inches**

Door Thickness: 3.3cm or 1 1/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 14kg or 30lbs
Approximate age: 1970s

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.