Panel Door with a four 2over2 panel layout panels are square edged
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Glazed with with some panes missing of clear,pattern glass.
Used condition
Flaking paint ,We have measured to make the door square,Has not be cut square at the bottom,Has not be cut square at the top,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Well made with mortise and tenant joints
There are remains of old hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
4th picture shows old lock holes
5th picture shows one glass missing ready to add new pane


Measurements:
Height: 197cm or 77 1/2"
**Height could be cut down by 10cm**
**2cm off the top 8cm off the bottom**
**Which could make the height as low as 187cm or 73 1/2 inches**

Width: 68cm or 26 3/4"
**Width could be cut by 4cm**
**Which could make it as narrow as 64cm or 25 1/8 inches**

Door Thickness: 3.6cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 20kg or 44lbs
Approximate age: Victorian
Victorian era 1837 to 1901
!This has glass and will require careful handling!