26 5/8"X 70" Old Internal Painted Pine 7 Plank Ledge & Brace Short Cottage Door

7 plank ledge & brace door which has a V chamfer with 3 ledges & 2 braces
Could also be used for a cupboard door.
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Used condition
Flaking paint ,Has not be cut square at the top,We have measured to make the door square,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
Comes with old T hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
3 of these photos have the following comments,
4th picture shows old screw holes
10th picture shows old screw holes
11th picture shows t hinges included

If you have any other questions then please ask.

Measurements:
Height: 178cm or 70"
**Height could be cut down by 12cm**
**9cm off the top 3cm off the bottom**
**Which could make the height as low as 166cm or 65 1/4 inches**

Width: 67.8cm or 26 5/8"
**Width could be cut by 3cm**
**Which could make it as narrow as 64.8cm or 25 1/2 inches**

Plank Thickness: 1.8cm or 0 5/8 inches
Ledge/Brace Thickness: 2.7cm or 1 inches
Total Thickness of Planks & Ledges: 4.5cm or 1 3/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 14kg or 30lbs
Approximate age: Old