27 5/8"X 71 3/4" Old Stripped Pine 9 Plank Ledge & Brace Door Reclamation

9 plank ledge & brace door which has a V chamfer with 3 ledges & 2 braces
Could also be used for a cupboard door.
Made from: Pine
Either internal or external use
Finish: Stripped
Used condition
Needs a good clean ,Some black spotting which will fade with sanding,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
1 of these photos have the following comments,
6th picture shows old worm holes

If you have any other questions then please ask.

Measurements:
Height: 182.5cm or 71 3/4"
**Height could be cut down by 13cm**
**12cm off the top 1cm off the bottom**
**Which could make the height as low as 169.5cm or 66 5/8 inches**

Width: 70.4cm or 27 5/8"
**Width could be cut by 2cm**
**Which could make it as narrow as 68.4cm or 26 7/8 inches**

Plank Thickness: 1.4cm or 0 1/2 inches
Ledge/Brace Thickness: 2cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 3.4cm or 1 1/4 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.