27 5/8"X 78 1/4" Old Internal Painted Pine 5 Plank Ledge Door Reclamation

5 plank ledge door which has a V chamfer with 3 ledges
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Used condition
Flaking paint ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
4 of these photos have the following comments,
4th picture shows 5 holes at the top
6th picture shows old hinge screw holes
10th picture shows crackled paint
11th picture shows old lock hole

If you have any other questions then please ask.

Measurements:
Height: 199cm or 78 1/4"
**Height could be cut down by 22cm**
**11cm off the top 11cm off the bottom**
**Which could make the height as low as 177cm or 69 5/8 inches**

Width: 70.3cm or 27 5/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 66.3cm or 26 inches**

Plank Thickness: 1.7cm or 0 5/8 inches
Ledge/Brace Thickness: 2cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 3.7cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 15kg or 33lbs
Approximate age: Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.