29 7/8"X 77" Old Painted Pine Somerset Reclamation

9 plank ledge & brace door which has a V chamfer with 3 ledges & 2 braces
Made from: Pine
Either internal or external use
Finish: Painted Purple and red
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
In a rustic condition
Flaking paint ,Some old lock holes ,Some old nail or screw holes
No hinges
As well as the description & detailed measurements, we have taken 12 pictures, please look through them in detail
2 of these photos have the following comments,
4th picture shows old screw holes
5th picture shows hinge marks

If you have any other questions then please ask.

Measurements:
Height: 195.6cm or 77"
**Height could be cut down by 22cm**
**14cm off the top 8cm off the bottom**
**Which could make the height as low as 173.6cm or 68 1/4 inches**

Width: 76cm or 29 7/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 72cm or 28 1/4 inches**

Plank Thickness: 1.7cm or 0 5/8 inches
Ledge/Brace Thickness: 1.9cm or 0 3/4 inches
Total Thickness of Planks & Ledges: 3.6cm or 1 3/8 inches

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 16kg or 35lbs
Approximate age: Old

No hinges but we may have some old hinges in stock that may suitable for this item, get in touch if you need some.