Panel Door with a four 2over2 panel layout beaded one side square edge the other
Made from: Pine
Internal use
Finish: Painted White
*We offer a paint/varnish stripping service please get in touch to get a quote if you require this. We can also apply a new finished eg wax*
Glazed with 2 panes of clear,opaque glass.
Used condition
Flaking paint ,We have measured to make the door square,Has not be cut square at the bottom,Has not be cut square at the top,Needs a good clean ,Some old nail or screw holes ,Some scratches and marks
Comes with cast iron hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
4th picture shows bubble textured glass


Measurements:
Height: 194.2cm or 76 3/8"
**Height could be cut down by 5cm**
**1cm off the top 4cm off the bottom**
**Which could make the height as low as 189.2cm or 74 3/8 inches**

Width: 77.1cm or 30 1/4"
**Width could be cut by 3cm**
**Which could make it as narrow as 74.1cm or 29 1/8 inches**

Door Thickness: 3.3cm or 1 1/4 inches
Glass pane height: 93.5cm or 36 3/4"
Glass pane width: 23.1cm or 9"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 25kg or 55lbs
Approximate age: Victorian
Victorian era 1837 to 1901
!This has glass and will require careful handling!