33 7/8"X76 7/8" Victorian Internal Stripped Pine Five Panel Door 1over2over2

Panel Door with a five 1over2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
Sold as seen condition
Needs some repair ,Old 1970s panel pin holes around the edge ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Would benefit from a sanding
Comes with cast iron hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
4th picture shows damage to top corner
5th picture shows top panel is ply
6th picture shows old lock holes


Measurements:
Height: 195.5cm or 76 7/8"
**Height could be cut down by 11cm**
**2cm off the top 9cm off the bottom**
**Which could make the height as low as 184.5cm or 72 5/8 inches**

Width: 86.2cm or 33 7/8"
**Width could be cut by 4cm**
**Which could make it as narrow as 82.2cm or 32 1/4 inches**

Door Thickness: 4.1cm or 1 1/2 inches
Top could be cut to make a shorter 4 panel door: 163cm or 64 1/8"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 30kg or 66lbs
Approximate age: Victorian
Victorian era 1837 to 1901