35 1/2"X82 5/8" Victorian Internal Stripped Pine Five Panel Door 1over2over2

Panel Door with a five 1over2over2 panel layout it is beaded on both sides of the door
Made from: Pine
Internal use
Finish: Stripped
Sold as seen condition
Has not be cut square at the side,We have measured to make the door square,Needs some repair ,Some old lock holes ,Some old nail or screw holes ,Some scratches and marks ,Some panels have splits,Beading needs tidying up
comes with steel hinges
As well as the description, we have taken 12 pictures, please look through them in detail.
5th picture shows old lock holes
6th picture shows bottom edge has some damage and the panel has a split to glue
11th picture shows panel damage
12th picture shows bottom panel has a knot missing

Measurements:
Height: 210cm or 82 5/8"
**Height could be cut down by 12cm**
**1cm off the top 11cm off the bottom**
**Which could make the height as low as 198cm or 77 7/8 inches**

Width: 90.3cm or 35 1/2"
**Width could be cut by 1.5cm**
**Which could make it as narrow as 88.8cm or 34 7/8 inches**

Door Thickness: 4cm or 1 1/2 inches
Top could be cut off to make shorter 4 panel: 176cm or 69 1/4"

**This information is a guide only, the amount that can be cut is from the top or the bottom or both and the same with the sides, it may be possible to cut more but it might effect the strength or look
Also note we measure using CM and then it gets converted to inches & rounded down to the nearest eighth (1/8) of an inch

Approximate Weight: 30kg or 66lbs
Approximate age: Victorian
Victorian era 1837 to 1901